OMNI-DIRECTIONAL ANTENNAS

ANT2400-14S		ANT2400-F4		ANT2400-O4		ANT2400-O8		ANT2400-O10
¼ wavelength antenna (for metallic surface)		Colinear whip 4.15dBi FME		Colinear 4.2dBi with PVC corner		Colinear 8dBi		Colinear 10dBi

 Quarter wave antenna datasheet
 4.15dBi colinear whip antenna datasheet
 4.2dBi colinear antenna with PVC corner datasheet
 10dBi colinear antenna datasheet

---

DIRECTIONAL ANTENNAS

ANT2400-Y7		ANT2400-P9 / P15		ANT2400-R15 / R17 / R19
7dBi Yagi antenna		9dBi /15dBi panel antenna		15, 17, 19dBi antenna with parabolic reflector

 Yagi antenna datasheet

 9dBi panel antenna datasheet

 15dBi panel antenna datasheet

 15, 17 or 19dBi antenna with parabolic reflector datasheet

(*) NOTES:

• The quarter wave antenna requires an adapted ground plan (metallic surface). Not to be mounted on PVC cabinet!
  
• The shortened quarter antenna (helicoid) is less effective but can be used in small space.
• The half wave antenna doesn't require any ground plan so it could be mounted on a plastic case for instance.
• If the antenna needs to be deported and fixed on a pole, an appropriate antenna with low loss cable (ref CFP10-NM-NM-L) and N connector must be used.
• Yagi antennas are directional antennas : more the gain is important and more the direction angle is narrow. Take care of the polarization when installing: if there is an omni-directional on the other side (vertical), the blades of the Yagi must be positionned vertically.